Precision Digital Corporation designs, develops, manufactures, sells and distributes digital panel meter devices driven by embedded systems that transform, display and control critical process information. Our products can be located virtually anywhere in the plant; from the control room to Class I Div 1 areas (both explosion-proof and intrinsically safe). They will accept virtually any analog signal such as 4-20 mA, thermocouple, RTD, DC voltage and pulse as well as digital serial data, such as Modbus. Products include Digital Panel Meters, PID Process and Temperature Controllers, Annunciators, Multi-Channel Controllers, Loop-powered Indicators, Flow Rate Meters and Totalizers, Batch Controllers and Pump Controllers.
Digital Panel Meters
Digital panel meters are display instrumentation devices that read a variety of process & temperature input signals, process, and display that information for a user at an instrument panel or cabinet sub-panel. The most common are 1/8 DIN size digital panel meters, however Precision Digital offers a range of other sizes as well. Many have a NEMA 4X or IP65 rating; however this is only the rating for the seal at the panel, leaving the rear area behind the mounting panel exposed.
Large Display Meters
Large display meters offer the same functionality of other meters but all have displays of 1″ or larger. They are available in a wide variety of case styles, input types, and functions, but all have large, clear, easy to read digital displays.
Loop-powered meters process and display 4-20 mA inputs. This 4-20 mA signal also provides all the power necessary to operate the device, so no separate power wiring is required. They are available in a wide variety of case styles, and many have hazardous area approvals.
Precision Digital offers a complete line of auto-tuning PID temperature controllers. These controllers accept process and temperature inputs and a variety of control, alarm, and retransmission outputs. Standard set point controllers are available as well as controllers utilizing ramp & soak set point programs.
A scanner allows one other meter to display multiple process or temperature inputs. The scanner cycles through each input, with a visual display of what input is currently selected, and displays it on the meter attached to the scanner. This is a simple low-cost alternative for multiple meter solutions.
Field Mounted Products
Field mounted devices read a variety of process & temperature input signals, process, and display that information. Field mounted products include a full enclosure around the device, and do not require a panel, electrical cabinet or additional enclosure to encase the device. They are commonly wall or pipe mounted. Many have NEMA 4X or IP65 ratings, which applies to the entire device housing.
For more information on Precision Digital Indicators & Controllers please see their Product Catalogue.
For more information on the above models please feel free to contact us